 |
The laminated charts and tables are ideal for
use on the jobsite. They are printed on heavy paper and
laminated with 5 mil plastic for durability and protection.
If they get soiled just wipe them clean.
Note: All of the charts
and tables are included in the Crown Molding & Trim book
and the Crown Molding & Trim, Complete Packages #1 thru #4.
 |
(Retail
$22.45, only $17.95)
Miter Table©, Crown Molding
Table©, Compound Miter Chart©, Flowerpots/Birdhouse Chart©,
& the Miter Excel Program© (download only). All charts/tables are laminated
with 5 MIL plastic.
|
 |
Save
10%
|
 |
Save
10%
|
 |
Save
10%
(download
only)
|
|
(download only)
|
|
(download
only)
|
The Miter
Table© is for cutting trim (baseboards, char rails, etc.)
with a miter saw or compound miter saw. You can also cut
crown molding but, you must have the crown molding
propped up against the saw fence. See Chapter 3 for
complete details. |
|
The Crown Moulding Table© is for cutting 52°/38° (38°
spring angle) and 45°/45° (45° spring angle) crown moulding
using a compound miter saw. Place the crown lying flat and
face up on your saw. See Chapter 4 for complete
details.
|
|
The Compound Miter Chart© is for cutting
all crown moulding (regardless of the crown spring angle) using a
compound miter saw with the crown moulding lying flat and face
up. This chart is often needed when installing crown on a
cathedral ceiling. See Chapter 5 for complete
details. |
|
The Flowerpots & Birdhouse Chart© is
for of multisided , flowerpots, birdhouses or gazebos with 3 to 20
sides and wall/roof slope angle 0° to 90°. |
|
(Immediate
download after payment)The Miter Excel Program© (download only) contains the
equations for the tables and charts above. For crown
molding or trim, type in the corner angle and the crown slope
angle, press enter and you have your answer. For
flowerpots, birdhouses or gazebos, type in the number of sides
and dimensions, press enter and you have your answer. The
program was written in Excel 97 and will run on later version of
Microsoft Excel on a PC. If
you do not have Excel 97 or higher
then you can download a free program called OpenOffice to
run the excel program by clicking here.
|
|
|
 |
|
 |
